1. The engine of Furidi is a domestic engine. The Furidi, which participated in the C-NCAP test, was officially launched in June 2009. The Furidi is equipped with front dual airbags and ISOFXI devices. The front seat belts have pre-tightening and force-limiting functions, and the driver's seat is equipped with Fully equipped with a reminder device.
2. It is not considered imported. It's 6Y shackles. It is much more powerful than the ordinary 6 naturally aspirated. It also saves fuel.
3. Kia FordDi is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
4. Hello, this is a domestic engine. I wish you a pleasant drive.
1. Fredi provides two engine options. Among them, the maximum power of the 5L naturally aspirated engine is 82 kW, and the maximum torque is 148 N·m, which is matched with a 5-speed manual or 4-speed automatic transmission; the maximum power of the 5L turbocharged engine is 110 kW and the maximum torque is 210 N·m, which is matched with a 6-speed manual or 6-speed automatic transmission.
2. Yes. Kia Ford is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
3. The turbocharged engine is actually more suitable for driving on city roads, which can output the maximum torque at very low speeds. However, the maintenance cost of the naturally aspirated engine is lower, and the reliability and durability of this engine are also better.
4. The original oil label of Kia Fredi is 5W40, and 10W40 can also be used, mainly depends on the environment of the owner. If the temperature is below -25°C, it is recommended to use 5W40 model oil. Self-priming engines do not have high requirements for oil. Mineral oil and semi-synthetic oil can be used. If you have a large budget, you can use fully synthetic oil.
5. I agree that turbocharging is conducive to improving combustion quality, reducing emissions and improving engine power! However, because the turbocharger and the engine are two power machines of different nature, they are connected by in and out, attention should be paid to the mutual influence of their respective properties and the impact of the matching on the performance of the whole machine.
6. Geely Binyue is a very good small SUV. It is equipped with 0T and 4T power, and the overall performance is relatively smooth. The power performance is quite good. It should be noted that its speed can reach 190km/h.
Kia Fredi idling jitter shutdown, the reason for the engine jitter: the engine foot glue is aging or loose. The foot glue is the rubber block cushioned between the engine and the frame. Its function is to reduce the vibration and buffering of the engine during work, and to fix the engine.
The reason for stepping on the brake idling jitter and turning off the engine: the idling switch does not close fault analysis: when the idling contact is disconnected, the ECU determines the startThe machine is in a partial load state. At this time, the ECU determines the fuel injection volume and fuel injection time according to the air flow sensor and the crankshaft position and speed signal.
The reasons are as follows, which may be caused by too much carbon in the engine.
No idling speed may be due to the fact that the throttle valve is too dirty, causing the engine to have insufficient air intake and then turn off. Brother, is there anything wrong with the car inspection? I'm in the situation now. It takes too long to start the car with one click. Gear D waits for the traffic light, and the engine shakes twice and the engine turns off.
Shaking when idling in the morning. The hot car has improved. Phenomenon: When the car is launched in the morning, the engine shakes more than normal, and sometimes there will be a problem of not being able to start. Reason: It is possible that the throttle valve is too dirty, and there is too much carbon accumulation in the fuel injector and intake duct.
Binance login-APP, download it now, new users will receive a novice gift pack.
1. The engine of Furidi is a domestic engine. The Furidi, which participated in the C-NCAP test, was officially launched in June 2009. The Furidi is equipped with front dual airbags and ISOFXI devices. The front seat belts have pre-tightening and force-limiting functions, and the driver's seat is equipped with Fully equipped with a reminder device.
2. It is not considered imported. It's 6Y shackles. It is much more powerful than the ordinary 6 naturally aspirated. It also saves fuel.
3. Kia FordDi is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
4. Hello, this is a domestic engine. I wish you a pleasant drive.
1. Fredi provides two engine options. Among them, the maximum power of the 5L naturally aspirated engine is 82 kW, and the maximum torque is 148 N·m, which is matched with a 5-speed manual or 4-speed automatic transmission; the maximum power of the 5L turbocharged engine is 110 kW and the maximum torque is 210 N·m, which is matched with a 6-speed manual or 6-speed automatic transmission.
2. Yes. Kia Ford is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
3. The turbocharged engine is actually more suitable for driving on city roads, which can output the maximum torque at very low speeds. However, the maintenance cost of the naturally aspirated engine is lower, and the reliability and durability of this engine are also better.
4. The original oil label of Kia Fredi is 5W40, and 10W40 can also be used, mainly depends on the environment of the owner. If the temperature is below -25°C, it is recommended to use 5W40 model oil. Self-priming engines do not have high requirements for oil. Mineral oil and semi-synthetic oil can be used. If you have a large budget, you can use fully synthetic oil.
5. I agree that turbocharging is conducive to improving combustion quality, reducing emissions and improving engine power! However, because the turbocharger and the engine are two power machines of different nature, they are connected by in and out, attention should be paid to the mutual influence of their respective properties and the impact of the matching on the performance of the whole machine.
6. Geely Binyue is a very good small SUV. It is equipped with 0T and 4T power, and the overall performance is relatively smooth. The power performance is quite good. It should be noted that its speed can reach 190km/h.
Kia Fredi idling jitter shutdown, the reason for the engine jitter: the engine foot glue is aging or loose. The foot glue is the rubber block cushioned between the engine and the frame. Its function is to reduce the vibration and buffering of the engine during work, and to fix the engine.
The reason for stepping on the brake idling jitter and turning off the engine: the idling switch does not close fault analysis: when the idling contact is disconnected, the ECU determines the startThe machine is in a partial load state. At this time, the ECU determines the fuel injection volume and fuel injection time according to the air flow sensor and the crankshaft position and speed signal.
The reasons are as follows, which may be caused by too much carbon in the engine.
No idling speed may be due to the fact that the throttle valve is too dirty, causing the engine to have insufficient air intake and then turn off. Brother, is there anything wrong with the car inspection? I'm in the situation now. It takes too long to start the car with one click. Gear D waits for the traffic light, and the engine shakes twice and the engine turns off.
Shaking when idling in the morning. The hot car has improved. Phenomenon: When the car is launched in the morning, the engine shakes more than normal, and sometimes there will be a problem of not being able to start. Reason: It is possible that the throttle valve is too dirty, and there is too much carbon accumulation in the fuel injector and intake duct.
Binance Download for PC Windows 10
author: 2025-01-23 02:07413.83MB
Check481.86MB
Check951.21MB
Check356.73MB
Check342.74MB
Check928.54MB
Check238.54MB
Check566.68MB
Check427.41MB
Check516.77MB
Check182.15MB
Check121.14MB
Check711.17MB
Check324.69MB
Check671.96MB
Check471.77MB
Check751.76MB
Check548.76MB
Check438.86MB
Check587.97MB
Check849.24MB
Check829.74MB
Check936.64MB
Check369.58MB
Check982.71MB
Check773.56MB
Check432.53MB
Check379.87MB
Check968.96MB
Check363.97MB
Check266.66MB
Check666.91MB
Check497.25MB
Check618.88MB
Check592.37MB
Check223.12MB
CheckScan to install
Binance login to discover more
Netizen comments More
2134 倒行逆施网
2025-01-23 00:48 recommend
462 朝野上下网
2025-01-23 00:14 recommend
2168 谋臣武将网
2025-01-22 23:47 recommend
707 三头六证网
2025-01-22 23:45 recommend
276 巴山越岭网
2025-01-22 23:27 recommend